This paint for the bottom of aluminum boats is perfect for protecting your boat from wear and tear caused by the water. It is designed to provide a durable, waterproof coating that will keep your boat looking good and performing well. The paint has excellent adhesion properties, making it easy to apply and providing long-lasting protection. It is also UV-resistant and will not fade over time. It is available in a variety of colors to match your boat’s color scheme and make it look its best. With this paint, you can keep your aluminum boat in top condition and enjoy it for years to come!
Top 10 Must-Haves & Best Paint For Bottom Of Aluminum Boat, Expert-Recommended Picks
1#. Rust-Oleum 207013-4PK Marine Boat Bottom Antifouling Paint, Blue
Features
Ideal for use on fiberglass, wood or steel surfaces to prevent fouling below the waterline
Formulated to slowly release copper in order to prevent fouling
Able to recoat in 4 hours, to launch in 16 hours and covers up to 110 sq. ft.
Protective coating resists buildup of barnacle and other marine growth
Hard, smooth finish provides a flat sheen over most aged antifouling coatings
2#. TotalBoat AlumiPaint AF Copper Free Aluminum and Pontoon Boat Bottom Paint
Features
COPPER-FREE ANTIFOULING PAINT for superior single-season protection on pontoons & aluminum hulls.
ABLATIVE PAINT wears away to continuously expose fresh biocide for maximum protection.
SPECIFICALLY FORMULATED FOR PONTOON & ALUMINUM BOATS. Bottom paints are used below the waterline only.
EXCELLENT PERFORMANCE ON OUTDRIVES & RUNNING GEAR. Copper-free formula won’t cause galvanic corrosion.
AVAILABLE IN QUARTS & GALLONS, IN YOUR CHOICE OF BLACK OR BLUE. Coverage: 500 sq. ft. per gallon (125 sq. ft. per quart)
3#. TotalBoat Krypton Copper Free Antifouling Bottom Paint for Fiberglass, Wood, Aluminum and Steel Boats, Outdrives and Trim Tabs
Features
HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water
COPPER FREE FORMULA won’t cause galvanic corrosion on aluminum boats, outdrives and trim tabs; copper-free paint also means colors are much brighter than bottom paint that contains copper biocide
FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only; haul and relaunch without losing the effectiveness of the biocide
EASY TO APPLY: For brushing, use a high-quality, natural bristle brush; for rolling, use a 3/16” nap or foam solvent-safe roller cover; if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying)
AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only); Coverage: 500 sq. ft. per gallon; after applying, there’s no maximum dry time before launch
4#. TotalBoat Aluminum Boat Paint for Canoes, Bass Boats, Dinghies, Duck Boats, Jon Boats and Pontoons (Black, 1 Quarts (Pack of 1))
Features
TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first; prevents corrosion and resists UV damage, chemicals and abrasion
ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree stands, ladders, boat trailers and more. Easy to create a camouflage finish for hunting
EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get superior adhesion to prepared aluminum without priming
ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water. Finish won’t peel, chip, or fade. Finish resists scratches, abrasion, chemicals, water, and UV damage
AVAILABLE IN EARTH BROWN, FLAT DARK EARTH, KHAKI, BLACK, WHITE, LIGHT GRAY, ARMY GREEN, AND OLIVE DRAB); Sizes: Quart and Gallon; Coverage: 80-100 sq ft/qt; 320-400 sq ft/gal; Use above or below the waterline
5#. TotalBoat JD Select Ablative Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon), 1 Gallon (Pack of 1)
Features
ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season; ideal for fiberglass, wood and steel boats in salt water and fresh water
ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water; minimizes bottom paint build up so you have less sanding to do next season; durable finish can be burnished for smoothness, speed & fuel efficiency
LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water; ideal for use in marinas and boat yards with environmental restrictions; no maximum dry time before launch
EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush – natural bristle; Roller – 3/16” nap or foam solvent-safe cover; Spray – airless or conventional; if needed, thin with water, up to 10%; apply 1-2 thin coats; no sanding needed between coats
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes; Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints; for use on boat bottoms & hulls below waterline only
6#. TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray) 128 Fl Oz (Pack of 1)
Features
High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints
Provides superior corrosion protection on all underwater metals
Fast drying, with no sanding needed between coats
For use above and below the waterline
Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200
7#. Rust-Oleum Available 207012 Marine Flat Boat Bottom Antifouling Enamel Paint, 1-Quart, Black, (Pack of 1), 32 Fl Oz
Features
Ideal for use on fiberglass, wood or steel surfaces to prevent fouling below the waterline
Formulated to slowly release copper in order to prevent fouling
Able to recoat in 4 hours, to launch in 16 hours and covers up to 110 sq ft
Protective coating resists buildup of barnacles, algae and other marine growth
Hard, smooth finish provides a flat sheen over most aged antifouling coatings
For use in mild to moderate fouling conditions
Suitable for both fresh and saltwater
Best for boats that are regularly hauled and cleaned
Use on fiberglass boats and all non-aluminum trailer boats
This item is not for sale in Catalina Island
8#. DURALUX Camouflage Paint – Duckboat Drab, 1 Gallon, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum
Features
CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint.
LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish.
FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It’s perfect for boats, tree stands, hunting blinds, ATVs and trailers.
EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container.
FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
9#. TotalBoat-365394 Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Flag Blue, 1 Quarts (Pack of 1))
Features
DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention
EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline
SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim
VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours
CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)
10#. Rust-Oleum 207012-4PK Marine Boat Bottom Antifouling Paint, Black
Features
Ideal for use on fiberglass, wood or steel surfaces to prevent fouling below the waterline
Formulated to slowly release copper in order to prevent fouling
Able to recoat in 4 hours, to launch in 16 hours and covers up to 110 sq. ft.
Protective coating resists buildup of barnacles and other marine growth
Hard, smooth finish provides a flat sheen over most aged antifouling coatings