This PVC glue is specifically designed for high-pressure applications. It has a fast-acting formula that creates a strong bond quickly, allowing for even the most demanding jobs to be completed with speed and precision. The glue is non-toxic and non-flammable, making it safe to use in a variety of environments. It also has excellent adhesion properties, allowing it to bond to a variety of surfaces including PVC, metal, and plastic. It is highly resistant to weathering and temperature extremes, making it ideal for outdoor applications. The glue is also easy to use, with a long working time that allows you to reposition pieces before the glue sets. This makes it ideal for difficult and intricate projects. With this PVC glue, even the most challenging jobs can be done with ease.
Editor’s Top 10 Best Pvc Glue For High Pressure, Top Picks for 2023
1#. J-B Weld 8277 WaterWeld Epoxy Putty Stick – 2 oz., Off White
Features
J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water.
CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white.
PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured.
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC.
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
2#. Christy’s Red Hot Pool Pro PVC Cement – Medium Body, Very Fast Set, Low-VOC, 1 Quart (32 fl oz)
Features
Ideal for use in pools, spas, whirlpool baths, and other wet areas for easy damp repairs
Applies blue for quick, accurate application and fades to clear in sunlight for a sleek, professional finish
Medium body allows for clean application and fast set time
Works with all PVC pipes and fittings through 6″ and with Schedule 80 through 4″ as well as with potable water, pressure, non-pressure, gas, conduit, drain, duct, DWV, flexible, and rigid pipe
NSF certified and low VOC for high-quality performance
3#. Bond It F4 Emergency Self-Fusing Silicone Tape, Repair Plumbing Pipe & Radiator Hose Leak, Electrical Insulation, Permanent Bonding, Waterproof, 1″ x 36′ x 20mil, Red
Features
F4 Tape is manufactured to military and aviation standards. The new rapid fuse technology, high tensile strength, high-temperature resistance and high-performance, significantly exceeds the Mil Specifications for self-fusing silicone tape
The new fusing silicone formula fuses in seconds and bonds to itself permanently. Better elasticity and better elastic memory. Easier to separate from the plastic liner. Thorough fusion without the need to clamp or tie the ends
Resists pressure up to 950 PSI and insulates up to 8,000 volts. Withstands constant operating temperatures of 392F degrees (200C) and resists up to 500F degrees (260C). Resistance to oils, fuels, and many chemicals. Does not become gummy or sticky
Insulate and protect wiring and connections. Waterproof connections and fittings. Replace shrink tape and shrink tubing. Wrap wires for safety and protection. Wrap tool handles, aircraft handles and knobs for a non-slip grip and emergency repairs on lines and hoses
F4 Tape is lab tested and manufactured in the USA with extruded of a high-performance silicone elastomer. Available in the traditional military Red Oxide or Black color with blue guideline. Each roll is 1″ wide x 36′ long x .020″ (20mil) thick
4#. HH-66 Vinyl Cement, 4 oz. can – RH Adhesives
Features
Trusted PVC Vinyl Adhesive – Our HH-66 Vinyl Cement sets the industry standard for creating a flexible and durable bond
Waterproof Bonding Formula – It will work underwater, drying quickly for making repairs to your gear
Adheres to Vinyl Fabric – Our formula allows for bonding of vinyl to vinyl, and it also will bond to most rigid plastics
Works in Harsh Conditions – Our adhesive goes on smoothly, and it handles temperature and weather extremes without losing its grip
Made-in-America Adhesives – We have made our reliable adhesive formulas in the United States since 1949, giving customers reliable results
5#. Weld-On 14021 782 PVC Heavy-Bodied High Strength Plumbing Solvent Cement – Medium-Setting and Low-VOC, Gray, 1 Quart (32 fl oz)
Features
Heavy-bodied, medium-setting, low-VOC PVC cement
High-strength gray plumbing PVC cement applies smoothly and has a medium set time ideal for warm-weather applications
Low-VOC formula reduces solvent emissions for a better working environment
Compatible with all PVC pipes and fittings up to 12 inches (including Schedule 80)
Meets SCAQMD Rule 1168/316A, ASTMD2564, NSF/ANSI 14, and NSF/ANSI 61 performance specifications; contributes toward satisfying Indoor Environmental Quality credits for LEED v4
6#. Oatey 30246 PVC Regular Cement and 4-Ounce NSF Purple Primer Handy Pack
Features
ALL-PURPOSE CEMENT AND PURPLE PRIMER HANDY PACK: Includes one 4 oz. can of all-purpose clear cement and one 4 oz. can of purple primer for PVC pipe and fittings
REGULAR CLEAR CEMENT: Recommended for potable water, pressure pipe, conduit, and DWV applications, and it flows freely and sets up quickly at the recommended application temperature of 40 to 110 degrees Fahrenheit
INDUSTRIAL-GRADE PURPLE PRIMER: Recommended for use on CPVC/PVC pipe and fittings of all schedules and diameters, and it is for use in areas where code calls for verification that a primer has been used
AGGRESSIVE PRIMING: Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent solvent weld
COMPLIANCE: Both the cement and primer are certified to UL Greenguard Gold, NSF and UPC approved, exceed ASTM Standard D2564 and ASTM F 656, and comply with NSF/ANSI 61 health effects requirements
Convenient “Handy Pack” for storage – just add pipe and fittings
Contains one can of PVC Cement and one can of NSF Purple Primer
Clear, recommended for pipe up to 3” diameter
7#. J-B Weld High Heat Epoxy Syringe, Dark Grey
Features
J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat’s cure time is accelerated by heat and can cure in 1 hour at 250°F.
CURE AND SET TIME: At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat’s cure time is accelerated by heat and can cure in 1 hour at 250°F.
PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant.
SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass
8#. Christy’s Red Hot Blue Glue PVC Cement – Medium Body, Very Fast Set, Low-VOC, 1/2 Pint (8 fl oz)
Features
Premium, quick-set blue formula preferred by contractors for strength and ease of application
Low VOC: Fewer odors for a pleasant workplace experience
Medium body creates a quick set time of 10 minutes until product can be handled, 24 hours to cure (varies depending on pipe size)
Safe for use in all classes and Schedules through 6″ diameter interference fit
Designed to bond in wet, dry, and humid conditions
9#. Christy’s Handy Pack: Red Hot Blue Glue Medium Body PVC Cement and Purple Primer, 1/2 Pint (8 fl oz),RH-RHBV-HDYPK-HP-20
Features
Package includes (1) 8oz can each of Red Hot Blue Glue and Purple Primer
Products work on PVC potable water, pressure and non-pressure, drain, conduit, duct, DWV, and sewer applications through 6″, including Schedule 80
Rapid cement set time for efficient work: 10 minutes until product can be handled, 24 hours to cure (varies depending on pipe size)
Both products are low-VOC for a pleasant working experience
Made in the USA and NSF-certified
10#. Oatey 30850 Heavy Duty Solvent Cement, 4 Oz, Can, Liquid, Clear
Features
Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure
Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements
Thick formula fills gaps in large diameter pipe and loose fitting joints
Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure
Lo-V. O. C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD)
Thick formula fills gaps in large diameter pipe and loose fitting joints
Recommended for potable water, pressure pipe, conduit and DWV
Recommended application temperature 40°F to 110°F / 4°C to 43°C
Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure
Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD)
Thick formula fills gaps in large diameter pipe and loose fitting joints
Recommended for potable water, pressure pipe, conduit and DWV
Recommended application temperature 40°F to 110°F / 4°C to 43°C
